Baseus 3D Curved Tempered Glass for iPhone 16 15 Pro Max Hot Bending Full Coverage Shatterproof Clear Corning Screen Protector

Operation Guide

Checking

1. Please kindly check the details after receiving the parcel. Completely including Tempered Glass Screen Protector *1, Scroller dust-proof installation tool *1, cleaning kit *1, scraper*1.

2. Ensure the mounting piece is properly installed onto the calibration layer. If not, please install the mounting piece first, Install the scroller onto the bottom of the installation tool with the scroller facing down. Place your phone into the installation tool.

Cleaning

1. Open the cleaning kit, which includes a Dust-removing sticker *1, an Alcohol pad *1, and a Dusting cloth *1.

2. Use the alcohol pad to clean the screen.

3. Wipe the screen dry with the dusting cloth.

4. Remove the large particles from the screen with the sticker.

Installation

1. Install the screen protector with the arrow on the tab facing the bottom of the phone.

2. Hook the extended part of the screen protector onto the installation tool as shown in the video. (Note: Make sure the middle part of the screen protector does not touch the screen.)

3. Pull out the tab to let the screen protector attach to the screen and remove the remaining dust.

4. Push the scroller to ensure a seamless attachment of the screen protector. Push the scroller to the bottom and then push it back to the top.

5. Unhook the screen protector from the tool and peel off the release liner.

Kind Reminder

Improper operations may cause air bubbles, please follow the instructions below to remove them: Using a scraper at a 45° angle, push any bubbles towards the edges until they are expelled.